An Analysis of Impact of Furfurylation Treatments on the Physical and Mechanical Properties of Pterygota macrocarpa Wood
Owoyemi Jacob Mayowa
Department of Forestry and Wood Technology, Federal University of Technology, Akure, Nigeria.
Falade Oluwatosin Esther
Department of Forestry and Wood Technology, Federal University of Technology, Akure, Nigeria.
Iyiola Ebenezer Adeyemi *
School of Forestry, University of Canterbury, Christchurch, New Zealand.
D. Oladapo Oluwatobi
Department of Forestry and Wood Technology, Federal University of Technology, Akure, Nigeria.
*Author to whom correspondence should be addressed.
Abstract
Wood is an important structural material requiring treatments to improve its properties and resistance to biodeterioration agents; one of such is wood modification. Furfurylation is one of the chemical modifications of wood. It is based on wood impregnation with furfuryl alcohol and other agents (catalyst), followed by polymerization at an elevated temperature. The objective of this study was to assess the effect of furfuylation treatments on the physical and mechanical properties of Pterygota macrocarpa. Wood samples were collected from Pterygota macrocarpa tree longitudinally and transversely on which modification was carried out with furfuryl alcohol and catalyst (Maleic anhydride and Tartaric acid) at different proportions using a pressure impregnating equipment at a pressure of 4 bars and later cured at 150°C for 3 hours. Material preparations and testing were done according to the American Society for Testing Materials (ASTM). The data obtained were analysed using Statistical Package for Social Science (SPSS). Descriptive statistics of the properties measured were generated. The data were subjected to Analysis of Variance (ANOVA) and Duncan Multiple Range Test (DMRT) to determine the significant difference between various treatment and their interactions at 0.05 level of significance. Results of density for untreated P. macrocarpa wood ranged from 464.55 kg/m³ to 625.92 kg/m³ while modified P. macrocarpa wood has weight percent gain (WPG) and density increment (DI) due to furfurylation which ranged from 8.65 to 15.34% and 1.49 to 4.94% respectively. Effect of bulking coefficient (BC) on P. macrocarpa wood varied among the treatments which ranged from 5.70 to 15.26%. It was observed that the wood's dimensional stability (Anti-swelling efficiency) increased with furfurylation. Furthermore, the practical implications are the increase in the mechanical properties which varied among treatments. Modulus of Elasticity ranged from 2098.27 to 3372.64 N/mm2, Modulus of Rupture ranged from 44.82 to 64.53 N/mm2 with 4% level of tartaric acid recorded the highest values while compression parallel to grain ranged from 25.83 to 38.89 N/mm2 with 4% level of maleic anhydride having the highest value. For effective performance, 4% level of the catalysts can be used in the furfurylation process. The contributions of the research finding revealed that the inclusion of tartaric acid in the furfurylation process could serve as an alternative to maleic anhydride which is widely used. It is therefore recommended that further investigation should be carried out on the properties of furfurylated softwood and hardwood species.
Keywords: Modification, impregnation, polymerization, maleic anhydride, tartaric acid
How to Cite
Downloads
References
Ban Ki M. Importance of wood. Just Forests. Ringfort Workshop, Rathcobican, Rhode, Offaly, Ireland; 2012.
Available:http://www.justforests.org/public-procurement-matters/importance-of-wood
Accessed on 19-09-2019.
Adhikari S, Ozarska B. Minimizing environmental impacts of timber products through the production process “from sawmill to final products. Environmental Systems Research. 2018;7(6):1-15.
DOI:https://doi.org/10.1186/s40068-018-0109-x
Ekundayo OO, Arum C, Owoyemi JM. Forest product industry and engineered wood products: The Nigerian experience. Journal of Applied Science and Environmental Management. 2021;25(1): 99-107.
Ayarkwa J. The influence of site and axial position in the tree on the density and strength properties of the wood of Pterygota macrocarpa K. Schum. Ghana Journal of Forestry. 1998;6:34-41.
The Wood Database. Koto (Pterygota macrocarpa).
Accessed on 27 December 2022.
Available:https://www.wood-database.com/koto/
Christian A, George A, Vivian E, Francis A, Kwesi B, Louis A. Antimicrobial and anti-inflammatory activities of Pterygota macrocarpa and Cola gigantean (Sterculiaceae). An article in Evidence-based Complementary and Alternative Medicine (5073); 2012.
DOI: 10.1155/2012/902394
Dick S, Abdreja K, George M. Wood modification technologies – a review. Biogeosciences and Forestry. 2017;10: 895-908.
Wanju L, Hankun W, Dan R, YunShui Y, Yan Y. Wood modification with furfuryl alcohol catalysed by a new composite acidic catalyst. Wood Science Technology. 2015;49:845-856.
American Society for Testing Materials (ASTM) D4052-16. Standard test method for density, relative density, and API gravity of liquids by digital density meter, ASTM International, West Conshohocken, PA; 2016.
Available:www.astm.org.
Hill CAS. Wood modification: Chemical, thermal and pther Processes. Wiley Series in Renewable Resource, Wiley and Sons Eds Chichester Sussex UK. 2006;1:221-239.
Bartkowiak M, Doczekalska, B, Strzelecki, S. Modification of wood with furfuryl alcohol catalysed by a mixture of acid anhydrides. Annals of Warsaw University of Life Sciences – SGGW. Forestry and Wood Technology. 2015;92:26-29.
Bruno E, Lina N, Helena P. Properties of furfurylated wood (Pinus pinaster). European Journal of Wood Products. 2011;69: 521-525.
Youming D, Yinluan Q, Kaili W, Shuangbao Z, Jianzhang L, Shifeng Z. Assessment of the performance of furfurylated wood and acetylated wood: comparison among four fast-growing wood species. BioResources. 2016;11(2):3679-3690.
American Society for Testing Materials (ASTM) D143-09. Standard methods for testing small clear specimens of timber. Annual Book of ASTM Standards, ASTM International, West Conshohocken, USA; 2009.
Tom L. What does moisture content in wood mean? Delmhorst Instrument Co; 2018.
Assessed on 26th December 2018.
Available:https://www.delmhorst.com/blog/what-does-moisture-content-in-wood-mean
Denig J, Wengert EM, Simpson WT. Drying hardwood lumber. Gen. Tech. Rep. FPL–GTR–118. Madison, WI: U.S. Department of Agriculture, Forest Service. Forest Products Laboratory. 2000;4:131-138.
Nageeb AA, Dev-Prasad AG. Variation in wood specific gravity, density and moisture content of Dipterocarpus indicus (Bedd). among different populations in western ghats of Karnataka, India. International Journal of Applied Agricultural Research. 2010;5:583–599.
Sofia K, Jose L, Sofia L, Helena P. Within-tree and between-tree variation of wood density components in cork oak trees in two sites in Portugal. International Journal of Forest Research. 2008;81(4):465-473.
Ramananantoandro T, Ramanakoto MF, Rajoelison GL, Randriamboavonjy JC, Rafidimanantsoa HP. Influence of tree species, tree diameter and soil types on wood density and its radial variation in a mid-altitude rainforest in Madagascar. Annals of Forest Science. 2016;73:1113-1124.
Owoyemi JM, Olaniran OS. Natural resistance of ten selected Nigerian wood species to subterranean termites’ attack. International Journal of Biological Sciences and Applications. 2014;1(2):35-39.
Peter KD, Martin A, Kwasi FM, Sheldon QS. Comparison of density and selected microscopic characteristics of stem and branch wood of two commercial trees in ghana. Wood Science Technology. 2015;10:91-104.
Owoyemi J.M, Eniabiire OM, Emmanuel UO, Fuwape, JA. Efficacy of commonly used wood preservatives against subterranean termites in Akungba-Akoko, Ondo State, Nigeria. Journal of Research in Forestry, Wildlife and Environment. 2020;2(1):111-121.
Prabu SS, Aurelia I, Christine G, Stephane D, Emmanuel F, Eric M, Dodi N, Trisna P, Pillipe G. Tartaric acid catalyzed furfurylation of beech wood. Wood Science Technology. 2017;51:379-394.
Monika B, Beata D, Elzbieta K. Modification of alder wood with furfuryl alcohol. Annals Warsaw University of Life Sciences-SGGW. Forestry and Wood Technology. 2015;82:57-60.
Epmeier H, Johansson M, Kliger R, Westin M. bending creep performance of modified timber. HolzRoh-Werkst. 2007;65:343–351.
Kocaefe D, Huang X, Kocaefe Y. Dimensional stabilization of wood. Curr Forestry Rep. 2015;1:151–161.
Lande S, Westin M, Schneider MH. Properties of furfurylated wood. Scandinavia Journal of Forest Research. 2004;19:22-30.
Pfriem A, Dietrich T, Buchelt B. Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. Holzforschung. 2012;66:215–218.
Esteves B, Nunes L, Pereira H. Properties of furfurylated wood (Pinus pinaster). European Journal of Wood Products. 2011;69(4):521–525.
Yao M, Yang Y, Song J, Yu Y, Jin Y. Melamine formaldehyde modified furfurylation to improve chinese fir’s dimensional stability and mechanical properties. Bio Resources. 2017;12(2): 3057-3066.
Abdolzadeh H, Layeghi M, Ebrahimi G, Ghassemie M. Study of stress capacity improvement of l-type joint by chemical modification of wood. Bio Resources. 2014;9(3):5302-5310.