Journal of Materials Science Research and Reviews

Tribological Behavior of Hybrid AA6061/SiC/Carbonized Coconut Shell Nanocomposites

Michael N. Nwigbo *

Department of Mechanical and Aerospace Engineering, University of Uyo, Nigeria and Department of Mechanical Engineering, Ken Saro – Wiwa Polytechnic, Bori, Nigeria.

Lasisi E. Umoru

Department of Materials Science and Engineering, Obafemi Awolowo University, Nigeria.

*Author to whom correspondence should be addressed.

---

Abstract

In the present investigation, hybrid aluminum matrix composite was prepared by stir casting method using aluminum alloy 6061 as the matrix material and nanoparticles of carbonized coconut shell (CCS) and silicon carbide (SiC) as reinforcements, and characterized for wear behavior. The average reinforcement particle sizes were 42.3 nm and 50.01 nm for SiC and CCS respectively. The weight percentage of CCS and SiC nanoparticles were varied at equal amounts ranging from 3 to 15 wt.%, with 3 wt.%  steps. Wear test was done on a Pin on disc apparatus at varying load of 10 N, 20 N, 30 N, 40 N and 50 N under dry sliding conditions, at a constant speed of 2.0 m/s and a sliding distance of 400 mm. The wear loss and wear rate of each sample during the wear process was recorded by using a computer. The chemical composition and microstructural study of the composites were done using x-ray fluorescence (XRF) and scanning electron microscope (SEM), which revealed uniform distribution of nanoparticles of CCS (containing majorly SiO₂, Al₂O₃ and Fe₂O₃) and SiC in the matrix alloy. The wear results revealed that both the volumetric wear loss and wear rate of the composites decreased with increased weight percent of reinforcement, but increased with increased load. The results also indicated that the coefficient of friction of the composites increased with increased weight percent of reinforcement, particle size and applied loads.

Keywords: Aluminum, stir casting, wear behavior, wear rate, nanoparticles

---

---

---

References

Wang Z, Prashanth KG, Scudino S, Chaubey AK, Sordelet DJ, Zhang WW, Li YY, Eckert J. Tensile properties of aluminium matrix composites reinforced with in situ Al84Gd6Ni7Co3 glassy particles. Journal of Alloys Compound. 2014;86:419–422.

Karl UK. Metal matrix composites. Custom-made materials for automotive and aerospace engineering. WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. 2006:820.

Parswajinan C, Vijaya BR, Abishe B, Niharishsagar B, Sridhar G. Hardness and impact behaviour of aluminium metal matrix composite. The 3rd International Conference on Materials and Manufacturing Engineering. IOP Conference Series: Materials Science and Engineering.. Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya University, Kancheepuram, India. 2018;390:6.

Sudipt K, Ananda TJ. Production and characterisation of aluminium-Fly ash composite using stir casting method. BTech. Project. National Institute of Technology, Rourkela. 2008:73.

Michael OB, Kenneth KA, Lesley C. Aluminium matrix hybrid composites: A review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. Journal of Materials Research and Technology. 2015;4(4):434–445.

Vijaya RB, Elanchezhian C, Annamalai RM., Aravind, Sri Ananda AST, Vignesh V, Subramanian C. Aluminium metal matrix composites - A review. Review, Advanced Materials Science. 2014;38:55–60.

Senthilkumar G, Manoharan S, Balasubramanian K, Dhanasakkaravarthi B. An experimental investigation of metal matrix composites of aluminium (Lm6), boron carbide and fly ash. Australian Journal of Basic and Applied Sciences. 2016;10(1):137–144.

Iyasele EO. Comparative analysis on the mechanical properties of a metal matrix composite reinforced with palm kernel/periwinkle shell ash. Global Scientific Journal. 2018;6(8):1–24.

Nwigbo MN, Lasisi UE, Ukaru NY. Comparative study of tensile properties of hybrid AA6061/SiC/carbonized coconut shell micro and nano composites. International Journal of Mechanical and Civil Engineering. 2022;5(1):10–24.

Nwigbo MN, Lasisi UE. Applicability of carbonized coconut shell particulates and silicon carbides in synthesis of hybrid aluminium matrix composites. European Journal of Materials Science. 2022;9(1):1–17.

Bello SA, et al. Physical properties of coconut shell nanoparticles. University Journal of Science, Engineering and Technology. 2016;12(1):63-79.

Madakson PB, Aigbondon VS, Apasi, Yawas DS. Wear behaviour of AlSi-Fe alloy/coconut shell ash particulate composites. Tribology in Industry. 2012;34(1):36-43.

Apasi A, Yawas DS, Abdulkareem S, Kolawole MY. Improving mechanical properties of aluminium alloy through addition of coconut shell-ash. Journal of Science and Technology. 2016;36(3):34-43.

Donald AO, Hassan MA, Hamza S, Garba E, Dangtim DK, Mamadou M. Development and characterization of aluminum matrix composites reinforced with carbonized coconut shell and silicon carbide particle for automobile piston application. Global Scientific Journals. 2018;6(8):390–398.

Nwabufoh MN. Development and characterization of Al-3.7%Cu-1.4%Mg alloy/periwinkle ash (Turritella communis) particulate composites. MEng. Thesis. Ahmadu Bello University, Zaria, Nigeria. 2015:80.

Hassan SB, Aigbodion VS. The study of the microstructure and interfacial reaction of Al-Cu Mg/bagasse ash particulate composite. Journal of Alloy and Compounds. 2010;491:571–574.

Rajan TPD, Pillai RM, Pai BC, Satyanaryana KG, Rohatgi PK. Fabrication and characterization of Al-7Si-0.35Mg/fly ash metal matrix composites processed by different stir casting routes. Composites Science and Technology. 2007;67:3369–3377.

Boppana SB, Dayanand S, Kumar A, Kumar V, Aravinda T. Synthesis and characterization of nano graphene and ZrO2 reinforced AA6061 metal matrix composites. Journal of Materials Resource Technology. 2020;9:7354–7362.

Monikandan VV, Joseph MA, Rajendrakumar PK. Dry sliding wear of aluminium matrix hybrid composites. Resource-Efficient Technologies, Elsevier. 2016;12(3):12–24.

Gun YL, Dharana CKH, Ritchie RO. A physically-based abrasive wear model for composite materials. Wear. 2002;252:322–331.

Saravanan SD, Kumar MS. Effect of mechanical properties on rice husk ash reinforced aluminium alloy (AlSi10Mg) matrix composites. Proceedings of Engineering. 2013;64:1505-1513.

Aigbodion VS. The development and characterization of Al-Cu-Mg/bagasse ash particulate composites. PhD Thesis. Ahmadu Bello University, Zaria, Nigeria. 2010:176.